Super Duty Oil Filters Product Code: SDF
|
Offer
all-around better filtration and protection than conventional filters.
Full flow design for extended drain intervals and severe service. Contains
a high-tech blended filtration media composed of cellulose, synthetic and
glass fibers. The media sets the Super Duty apart from conventional
filters in capacity, efficiency and service life. Delivers superior
filtration and protection.
|
Product Description The AMSOIL Super Duty Oil Filter (SDF) is designed to provide maximum
filtration while meeting the high flow demands of modern automobiles. The
AMSOIL SDF contains a special cellulose, synthetic and glass blend media
that offers the best possible balance of long life, high capacity and
overall efficiency. |
Conventional Filters |
|
Most
conventional filters on the market use a thin layer of porous filter
paper as their filtration media, which compromises their ability to
catch fine particles. In addition, these filters have almost no
extended cleaning ability since their media have a low capacity for
storing dirt. Because of their limited filtering area, most
conventional paper filters display good flow characteristics but are
restricted in their capacity and longevity. Visit this concerned
automotive enthusiasts website and see the results for
yourself.
For
a look at these Conventional filters or Try Pro
Street Online AMSOIL's Old SDF20 Receives a C
|
|
Traps Dirt Throughout Media Thickness
The AMSOIL SDF has a lofted fiber depth-type media that traps dirt
throughout its entire thickness for exceptional filtering efficiency. It
keeps oil clean and free of wear-causing contaminants. The AMSOIL SDF Oil
Filter provides up to 100 percent more capacity and up to 20 percent
greater efficiency than other filters provide. It is ideal for use with
extended oil drain intervals. |
Built for Rugged Performance
The AMSOIL SDF has a heavy-duty case of drawn steel. The case is
double-crimped at the base with rolled-under seaming to withstand extreme
pressure surges and road shocks.
Assures Oil Flow with Relief Valve
On most filters a relief valve is provided to assure ample oil flow. It
prevents oil starvation in the engine in the event the media becomes
saturated.
Prevents Oil Drainage During Engine Shutdown
On filter installations where the mounting is sideways or upright, dirty
oil could drain out of the filter when the engine is shut off. The AMSOIL
SDF has an anti-drain back valve that keeps trapped contaminants in the
filter when the engine is not running.
Application
AMSOIL INC. recommends changing the AMSOIL SDF according to the following
guidelines.
In gasoline-fueled engines using any AMSOIL motor oil except AMSOIL
XL-7500 Synthetic Motor Oil, change the filter at 12,500-mile or six-month
intervals. In gasoline-fueled engines using AMSOIL XL-7500 Synthetic Motor
Oil, change the filter at 7,500-mile or six-month intervals. If a Hastings
or other filter is used, filter should be changed at manufacturer
recommendations.
In diesel-fueled large truck engines, change the filter(s) at the engine
manufacturer's recommended oil change interval. In diesel-fueled light
trucks, including pickups and vans, change the filter at 7,000 miles or
six-month intervals.
When using an AMSOIL Oil Filter with conventional motor oils, refer to the
owner's manual for the recommended oil filter change interval.
|